Maxi-Vac Inc Manufacturer of Tube and Coil Cleaning Equipment Beer Line Cleaning Equipment Pressure Washers Steam Cleaning Equipment OEM USA
Maxi-Vac Inc Manufacturer of Tube and Coil Cleaning Equipment Beer Line Cleaning Equipment Pressure Washers Steam Cleaning Equipment OEM USA Email Us Product Catalog Call Us Now

JM1800R Electric Direct Drive Variable Speed Reversible Tube Cleaner

Cleaning internally enhanced tubes is made easier by our Direct Drive Reversible JM1800R. The JM1800R incorporates all the features of the JM1800 plus a reversible rotating shaft and two directional foot switch to permit clockwise rotation for entering tubes and counterclockwise rotation for exiting. The unit is powered by an 1800 RPM D.C. (Permanent Magnet) motor, direct drive combined with a solid state speed control. This allows the operator to select Reversible rotational speeds from 0 to 1800 RPM with constant torque. Thus, the operator can handle the shaft and tools at a safe comfortable speed for the condition of the tubes being cleaned.

This feature cannot be offered on units with A.C. motors and constant high RPM'S. Tubes are left clean and free of energy absorbing build-ups of scale, algae, mud, etc. Operation of the machine is controlled by a reversing air actuated foot switch, just step on the switch pedal and the shaft rotates while water flows through the watertight nylon Flexible Shaft casing to the brush or cutting tool. While a tool rotates through the tube at up to 1800 RPM, driven by a flexible shaft, water flushes out loosened deposits.   

Recommended for Heat Exchangers, Condensers, Evaporators, Absorption Machines, Chillers and other internal tubes.

 

JM1800R Electric Reversible Direct Drive Tube Cleaner

Maxi-Vac Chiller Tube Cleaning Destroyer

Having trouble viewing this video? Click here to watch on YouTube.

  • Reversible
  • Direct Drive
  • Variable Speed
  • Reversible Air Powered Foot Switch for hands free operation & safety
  • Shock resistant
  • Compact and lightweight
  • Water Flush to remove deposits
  • Quick Connect to Flexible Shaft
Reversible Direct Drive  
Quick Connect to Flexible Shaft  
Flexible Shaft Speed Variable Speed 0 - 1800 RPM
Motor Power 1/2 HP, 6 Amps, 60 Hz, 115 volts (50 Hz Motors Available)
(Available in 220V 50/60 Hz)
Input Water Garden Hose
Unit Dimensions 11” W x 17” H x 9” L
Unit Weight
(Excludes Shafts)
40 Lbs.
Overall Shipping Dimensions 12” W x 33” H x 11” L
Overall Shipping Weight
(Excludes Shafts)
44 lbs (UPS)
Equipped with recessed male receptacle

Flexible Shafts for JM1800R

Product Description Dimensions
1815-1/4 15' Flexible Shaft for tubes 1/4" to 5/16" I.D. Overall Diameter 1/4", Core Diameter 1/8", Thread Tool End - 8/32 F
1825-1/4 25' Flexible Shaft for tubes 1/4" to 5/16" I.D. Overall Diameter 1/4", Core Diameter 1/8", Thread Tool End - 8/32 F
1835-1/4 35' Flexible Shaft for tubes 1/4" to 5/16" I.D. Overall Diameter 1/4", Core Diameter 1/8", Thread Tool End - 8/32 F
1815-3/8 15' Flexible Shaft for tubes 3/8" to 1/2" I.D. Overall Diameter 3/8", Core Diameter 1/4", Thread Tool End - 1/4-28 F
1825-3/8 25' Flexible Shaft for tubes 3/8" to 1/2" I.D. Overall Diameter 3/8", Core Diameter 1/4", Thread Tool End - 1/4-28 F
1835-3/8 35' Flexible Shaft for tubes 3/8" to 1/2" I.D. Overall Diameter 3/8", Core Diameter 1/4", Thread Tool End - 1/4-28 F
1815-1/2 15' Flexible Shaft for tubes 1/2" to 1" I.D. Overall Diameter 1/2", Core Diameter 5/16", Thread Tool End - 1/4-28 F
1825-1/2 25' Flexible Shaft for tubes 1/2" to 1" I.D. Overall Diameter 1/2", Core Diameter 5/16", Thread Tool End - 1/4-28 F
1835-1/2 35' Flexible Shaft for tubes 1/2" to 1" I.D. Overall Diameter 1/2", Core Diameter 5/16", Thread Tool End - 1/4-28 F
1825-1 25' Flexible Shaft for tubes OVER 1" I.D. Overall Diameter 1/2", Core Diameter 5/16", Thread Tool End - 1/4 F
1835-1 35' Flexible Shaft for tubes OVER 1" I.D. Overall Diameter 1/2", Core Diameter 5/16", Thread Tool End - 1/4 F

Nylon Condenser Brushes (5 Per Pack)

Recommended for removing soft deposits (mud, algae, etc.) in straight, non-ferrous tubes (copper, brass, plastic, etc.) Brush should be equal to or 1/16” smaller than tube I.D.

Part No. Description
1519-1/4 1/4" Dia., 4" Long
1519-5/16 5/16" Dia., 4" Long
1519-3/8 3/8" Dia., 4" Long
1519-7/16 7/16" Dia., 4" Long
1519-1/2 1/2" Dia., 4" Long
1519-9/16 9/16" Dia., 4" Long
1519-5/8 5/8" Dia., 4" Long
1519-11/16 11/16" Dia., 4" Long
1519-3/4 3/4" Dia., 4" Long
1519-13/16 13/16" Dia., 4" Long
1519-7/8 7/8" Dia., 4" Long
1519-15/16 15/16" Dia., 4" Long
1519-1 1" Dia., 4" Long

Brass Condenser Brushes (5 Per Pack)

Recommended for removing soft and light scale deposits in straight, non-ferrous tubes. Brush should be equal to or 1/16” smaller than tube I.D.

Part No. Description
1529-1/4 1/4" Dia.
1529-5/16 5/16" Dia.
1529-3/8 3/8" Dia.
1529-7/16 7/16" Dia.
1529-1/2 1/2" Dia.
1529-9/16 9/16" Dia.
1529-5/8 5/8" Dia.
1529-11/16 11/16" Dia.
1529-3/4 3/4" Dia.
1529-13/16 13/16" Dia.
1529-7/8 7/8" Dia.
1529-15/16 15/16" Dia.
1529-1 1" Dia.

Stainless Steel Condenser Brush (Individually Packed)

Recommended for removing soft and light scale deposits in straight, ferrous tubes (carbon steel, stainless steel, etc.) Brush should be equal to or 1/16 smaller than tube I.D.

Part No. Description
1549-1/4 1/4" Dia.
1549-5/16 5/16" Dia.
1549-3/8 3/8" Dia.
1549-7/16 7/16" Dia.
1549-1/2 1/2" Dia.
1549-9/16 9/16" Dia.
1549-5/8 5/8" Dia.
1549-11/16 11/16" Dia.
1549-3/4 3/4" Dia.
1549-13/16 13/16" Dia.
1549-7/8 7/8" Dia.
1549-15/16 15/16" Dia.
1549-1 1" Dia.

Maxi-Grit Nylon (Individually Packed)

Recommended for removing soft and light scale deposits in straight, ferrous and non-ferrous tubes. The abrasive impregnated nylon bristles of this brush clean and polish tubes in one step.  Unlike regular spiral brushes, Maxi-Grit is designed to be oversized in the tube so the bristles lay over, putting the abrasive in contact with the tube wall.

Part No. Description
1539-1/2 1/2" Diameter for tubes 1/4"-3/8" I.D.
1539-3/4 3/4" Diameter for tubes 3/8"-5/8" I.D.
1539-1 1" Diameter for tubes 11/16"-3/4" I.D.
1539-1-1/4 1-1/4" Diameter for tubes 13/16"-1" I.D.

Maxi-Spin Clean Tapered Impregnated Nylon
(Individually Packed)

Recommended for removing soft and light scale deposits in straight enhanced condenser tubes. The smaller diameter stands stiff and cleans the grooves.  The longer bristles lay flat to clean the large areas between the grooves.  The small diameter of the brush should match the tube diameter.

Part No. Description
1559-1/2 1/2" Diameter for tubes 1/2" I.D.
1559-5/8 3/4" Diameter for tubes 5/8" I.D.
1559-3/4 1" Diameter for tubes 3/4" I.D.
Insert your Review

Your Name :

Email :

Comment :

Please Introduce Secure Code:

Please contact us by phone at (630) 620-6669 or by email at sales@maxi-vac.com for information about this product

 

LiveZilla Live Help