Maxi-Vac Inc Manufacturer of Tube and Coil Cleaning Equipment Beer Line Cleaning Equipment Pressure Washers Steam Cleaning Equipment OEM USA
Maxi-Vac Inc Manufacturer of Tube and Coil Cleaning Equipment Beer Line Cleaning Equipment Pressure Washers Steam Cleaning Equipment OEM USA Email Us Product Catalog Call Us Now
JM1900 - Electric Direct Drive Variable Speed Tube Cleaner

JM1900 has a standard 2” threaded connection to the Flexible Shaft instead of the Quick Connect. The unit is powered by an 1800 RPM D.C. (Permanent Magnet) motor, direct drive combined with a solid state speed control. This allows the operator to select rotational speeds from 0 to 1800 RPM with constant torque. Thus, the operator can handle the shaft and tools at a safe comfortable speed for the condition of the tubes being cleaned. This feature cannot be offered on units with A.C. motors and constant high RPM'S. Tubes are left clean and free of energy absorbing build-ups of scale, algae, mud, etc.

Operation of the machine is controlled by an air actuated foot switch, just step on the switch pedal and the shaft rotates while water flows through the watertight nylon Flexible Shaft casing to the brush or cutting tool. While a tool rotates through the tube at up to 1800 RPM, driven by a flexible shaft, water flushes out loosened deposits. 

Recommended for Heat Exchangers, Condensers, Evaporators, Absorption Machines, Chillers and other internal tubes.

 

 

Maxi-Vac Chiller Tube Cleaning Destroyer
  • Direct Drive
  • Variable Speed
  • Air Powered Foot Switch for hands free operation & safety
  • Shock resistant
  • Compact and lightweight
  • Water Flush to remove deposits
  • Universal 2” Threaded Connection to Flexible Shaft
Direct Drive  
Universal 2” Threaded Connection to Flexible Shaft
Flexible Shaft Speed Variable Speed 0 - 1800 RPM
Motor Power 1/2 HP, 6 Amps, 60 Hz, 115 volts (50 Hz Motors Available)
(Available in 220V 50/60 Hz)
Input Water Garden Hose
Unit Dimensions 11” W x 17” H x 9” L
Unit Weight
(Excludes Shafts)
40 Lbs.
Overall Shipping Dimensions 12” W x 33” H x 11” L
Overall Shipping Weight
(Excludes Shafts)
44 lbs (Non-Freight)
Equipped with recessed male receptacle

Flexible Shafts for JM1900

Product Description Dimensions
1915-1/4 15' Flexible Shaft for tubes 1/4" to 5/16" I.D. Overall Diameter 1/4", Core Diameter 1/8", Thread Tool End - 8/32 F
1925-1/4 25' Flexible Shaft for tubes 1/4" to 5/16" I.D. Overall Diameter 1/4", Core Diameter 1/8", Thread Tool End - 8/32 F
1935-1/4 35' Flexible Shaft for tubes 1/4" to 5/16" I.D. Overall Diameter 1/4", Core Diameter 1/8", Thread Tool End - 8/32 F
1915-3/8 15' Flexible Shaft for tubes 3/8" to 1/2" I.D. Overall Diameter 3/8", Core Diameter 1/4", Thread Tool End - 1/4-28 F
1925-3/8 25' Flexible Shaft for tubes 3/8" to 1/2" I.D. Overall Diameter 3/8", Core Diameter 1/4", Thread Tool End - 1/4-28 F
1935-3/8 35' Flexible Shaft for tubes 3/8" to 1/2" I.D. Overall Diameter 3/8", Core Diameter 1/4", Thread Tool End - 1/4-28 F
1915-1/2 15' Flexible Shaft for tubes 1/2" to 1" I.D. Overall Diameter 1/2", Core Diameter 5/16", Thread Tool End - 1/4-28 F
1925-1/2 25' Flexible Shaft for tubes 1/2" to 1" I.D. Overall Diameter 1/2", Core Diameter 5/16", Thread Tool End - 1/4-28 F
1935-1/2 35' Flexible Shaft for tubes 1/2" to 1" I.D. Overall Diameter 1/2", Core Diameter 5/16", Thread Tool End - 1/4-28 F
1925-3/4 25' Flexible Shaft for tubes OVER 1" I.D. Overall Diameter 1/2", Core Diameter 5/16", Thread Tool End - 1/4 F
1935-3/4 35' Flexible Shaft for tubes OVER 1" I.D. Overall Diameter 1/2", Core Diameter 5/16", Thread Tool End - 1/4 F

Nylon Condenser Brushes (5 Per Pack)

Recommended for removing soft deposits (mud, algae, etc.) in straight, non-ferrous tubes (copper, brass, plastic, etc.) Brush should be equal to or 1/16” smaller than tube I.D.

Part No. Description
1519-1/4 1/4" Dia., 4" Long
1519-5/16 5/16" Dia., 4" Long
1519-3/8 3/8" Dia., 4" Long
1519-7/16 7/16" Dia., 4" Long
1519-1/2 1/2" Dia., 4" Long
1519-9/16 9/16" Dia., 4" Long
1519-5/8 5/8" Dia., 4" Long
1519-11/16 11/16" Dia., 4" Long
1519-3/4 3/4" Dia., 4" Long
1519-13/16 13/16" Dia., 4" Long
1519-7/8 7/8" Dia., 4" Long
1519-15/16 15/16" Dia., 4" Long
1519-1 1" Dia., 4" Long

Brass Condenser Brushes (5 Per Pack)

Recommended for removing soft and light scale deposits in straight, non-ferrous tubes. Brush should be equal to or 1/16” smaller than tube I.D.

Part No. Description
1529-1/4 1/4" Dia.
1529-5/16 5/16" Dia.
1529-3/8 3/8" Dia.
1529-7/16 7/16" Dia.
1529-1/2 1/2" Dia.
1529-9/16 9/16" Dia.
1529-5/8 5/8" Dia.
1529-11/16 11/16" Dia.
1529-3/4 3/4" Dia.
1529-13/16 13/16" Dia.
1529-7/8 7/8" Dia.
1529-15/16 15/16" Dia.
1529-1 1" Dia.

Stainless Steel Condenser Brush (Individually Packed)

Recommended for removing soft and light scale deposits in straight, ferrous tubes (carbon steel, stainless steel, etc.) Brush should be equal to or 1/16 smaller than tube I.D.

Part No. Description
1549-1/4 1/4" Dia.
1549-5/16 5/16" Dia.
1549-3/8 3/8" Dia.
1549-7/16 7/16" Dia.
1549-1/2 1/2" Dia.
1549-9/16 9/16" Dia.
1549-5/8 5/8" Dia.
1549-11/16 11/16" Dia.
1549-3/4 3/4" Dia.
1549-13/16 13/16" Dia.
1549-7/8 7/8" Dia.
1549-15/16 15/16" Dia.
1549-1 1" Dia.

Maxi-Grit Nylon (Individually Packed)

Recommended for removing soft and light scale deposits in straight, ferrous and non-ferrous tubes. The abrasive impregnated nylon bristles of this brush clean and polish tubes in one step.  Unlike regular spiral brushes, Maxi-Grit is designed to be oversized in the tube so the bristles lay over, putting the abrasive in contact with the tube wall.

Part No. Description
1539-1/2 1/2" Diameter for tubes 1/4"-3/8" I.D.
1539-3/4 3/4" Diameter for tubes 3/8"-5/8" I.D.
1539-1 1" Diameter for tubes 11/16"-3/4" I.D.
1539-1-1/4 1-1/4" Diameter for tubes 13/16"-1" I.D.

Maxi-Spin Clean Tapered Impregnated Nylon
(Individually Packed)

Recommended for removing soft and light scale deposits in straight enhanced condenser tubes. The smaller diameter stands stiff and cleans the grooves.  The longer bristles lay flat to clean the large areas between the grooves.  The small diameter of the brush should match the tube diameter.

Part No. Description
1559-1/2 1/2" Diameter for tubes 1/2" I.D.
1559-5/8 3/4" Diameter for tubes 5/8" I.D.
1559-3/4 1" Diameter for tubes 3/4" I.D.
Insert your Review

Your Name :

Email :

Comment :

Please Introduce Secure Code:

Please contact us by phone at (630) 620-6669 or by email at sales@maxi-vac.com for information about this product

 

LiveZilla Live Help