Maxi-Vac Inc Manufacturer of Tube and Coil Cleaning Equipment Beer Line Cleaning Equipment Pressure Washers Steam Cleaning Equipment OEM USA
Maxi-Vac Inc Manufacturer of Tube and Coil Cleaning Equipment Beer Line Cleaning Equipment Pressure Washers Steam Cleaning Equipment OEM USA Email Us Product Catalog Call Us Now
JM2900 - Electric Direct Drive Variable Speed FireTube Cleaner

The JM2900 is powered by an 1800 RPM D.C. (Permanent Magnet) motor, this motor separates us from the competition, direct drive combined with a solid state speed control, maintenance free. This allows the operator to select rotational speeds from 0 to 1800 RPM with constant torque. Thus, the operator can handle the shaft and tools at a safe comfortable speed for the condition of the tubes being cleaned.

This feature cannot be offered on units with A.C. motors and constant high RPM'S. Tubes are left clean and free of energy absorbing deposits. Operation of the machine is controlled by an air actuated foot switch, just step on the switch pedal and the shaft rotates while the Mastercraft Sootmaster vacuum removes the deposits from inside the tubes. The quality of our Dry Flexible Shafts is unmatched. While a tool rotates through the tube at up to 1800 RPM, driven by a flexible shaft, vacuum removes loosened deposits.   

JM1800R Electric Reversible Direct Drive Tube Cleaner

Maxi-Vac Chiller Tube Cleaning Destroyer
  • Direct Drive
  • Variable Speed
  • Air Powered Foot Switch for hands free operation & safety
  • Shock resistant
  • Compact and lightweight
  • Sootmaster Vacuum w/ Gun Attachment for Flexible Shaft
  • Highest Quality Dry Flexible Shafts
  • Vacuum Gun Attachment Sizes - 1-3/8", 1-5/8", 2", 2-1/2", 3", 3-1/2", 4"
Direct Drive  
2" Universal Threaded FlexShaft Connection  
Flexible Shaft Speed Variable Speed 0 - 1800 RPM
Motor Power 1/2 HP, 6 Amps, 60 Hz, 115 volts (50 Hz Motors Available)
(Available in 220V 50/60 Hz)
Vacuum Attachment Sizes 1-3/8", 1-5/8", 2", 2-1/2", 3", 3-1/2", 4"
Unit Dimensions 11” W x 17” H x 9” L
Unit Weight
(Excludes Shafts)
40 Lbs.
Overall Shipping Dimensions 12” W x 33” H x 11” L
Overall Shipping Weight
(Excludes Shafts)
44 lbs (UPS)
Equipped with recessed male receptacle

 

Mastercraft Sootmaster Vacuum  
Amps 11 amps
Waterlift 110"
Motor Power 2.3 HP, 120V
Vacuum Attachment Sizes 1-3/8", 1-5/8", 2", 2-1/2", 3", 3-1/2", 4"
Capacity 1.6 bu
CFM 115
Tank 15 Gal Steel
Style 4 Caster, 2.5"
Power Cord 30 ft, 3 wire grounded safety yellow line cord
Shipping Dimensions 19"L x 18"W x 33"H
Shipping Weight 58 lbs
 

 

Dry Flexible Shafts for JM2900 FireTube Cleaner

Product Description Dimensions
1915-1/4D 15' Flexible Shaft for tubes 1/4" to 3/8" I.D. Diameter 1/4", Core Diameter 1/8", Thread Tool End - 8/32F
1925-1/4D 25' Flexible Shaft for tubes 1/4" to 3/8" I.D. Diameter 1/4", Core Diameter 1/8", Thread Tool End - 8/32F
1935-1/4D 35' Flexible Shaft for tubes 1/4" to 3/8" I.D. Diameter 1/4", Core Diameter 1/8", Thread Tool End - 8/32F
1915-3/8D 15' Flexible Shaft for tubes 7/16" to 9/16" I.D. Diameter 3/8", Core Diameter 1/4", Thread Tool End 1/4-28F
1925-3/8D 25' Flexible Shaft for tubes 7/16" to 9/16" I.D. Diameter 3/8", Core Diameter 1/4", Thread Tool End 1/4-28F
1935-3/8D 35' Flexible Shaft for tubes 7/16" to 9/16" I.D. Diameter 3/8", Core Diameter 1/4", Thread Tool End 1/4-28F
1915-1/2D 15' Flexible Shaft for tubes 5/8" to 1" I.D. Diameter 1/2", Core Diameter 5/16", Thread Tool End 1/4-28F
1925-1/2D 25' Flexible Shaft for tubes 5/8" to 1" I.D. Diameter 1/2", Core Diameter 5/16", Thread Tool End 1/4-28F
1935-1/2D 35' Flexible Shaft for tubes 5/8" to 1" I.D. Diameter 1/2", Core Diameter 5/16", Thread Tool End 1/4-28F
1925-3/4D 25' Flexible Shaft for tubes OVER 1" I.D. Diameter 1/2", Core Diameter 5/16", Thread Tool End - 1/4F
1935-3/4D 35' Flexible Shaft for tubes OVER 1" I.D. Diameter 1/2", Core Diameter 5/16", Thread Tool End - 1/4F

Nylon Condenser Brushes (5 Per Pack)

Recommended for removing soft deposits (mud, algae, etc.) in straight, non-ferrous tubes (copper, brass, plastic, etc.) Brush should be equal to or 1/16” smaller than tube I.D.

Part No. Description
1519-1/4 1/4" Dia., 4" Long
1519-5/16 5/16" Dia., 4" Long
1519-3/8 3/8" Dia., 4" Long
1519-7/16 7/16" Dia., 4" Long
1519-1/2 1/2" Dia., 4" Long
1519-9/16 9/16" Dia., 4" Long
1519-5/8 5/8" Dia., 4" Long
1519-11/16 11/16" Dia., 4" Long
1519-3/4 3/4" Dia., 4" Long
1519-13/16 13/16" Dia., 4" Long
1519-7/8 7/8" Dia., 4" Long
1519-15/16 15/16" Dia., 4" Long
1519-1 1" Dia., 4" Long

Brass Condenser Brushes (5 Per Pack)

Recommended for removing soft and light scale deposits in straight, non-ferrous tubes. Brush should be equal to or 1/16” smaller than tube I.D.

Part No. Description
1529-1/4 1/4" Dia.
1529-5/16 5/16" Dia.
1529-3/8 3/8" Dia.
1529-7/16 7/16" Dia.
1529-1/2 1/2" Dia.
1529-9/16 9/16" Dia.
1529-5/8 5/8" Dia.
1529-11/16 11/16" Dia.
1529-3/4 3/4" Dia.
1529-13/16 13/16" Dia.
1529-7/8 7/8" Dia.
1529-15/16 15/16" Dia.
1529-1 1" Dia.

Stainless Steel Condenser Brush (Individually Packed)

Recommended for removing soft and light scale deposits in straight, ferrous tubes (carbon steel, stainless steel, etc.) Brush should be equal to or 1/16 smaller than tube I.D.

Part No. Description
1549-1/4 1/4" Dia.
1549-5/16 5/16" Dia.
1549-3/8 3/8" Dia.
1549-7/16 7/16" Dia.
1549-1/2 1/2" Dia.
1549-9/16 9/16" Dia.
1549-5/8 5/8" Dia.
1549-11/16 11/16" Dia.
1549-3/4 3/4" Dia.
1549-13/16 13/16" Dia.
1549-7/8 7/8" Dia.
1549-15/16 15/16" Dia.
1549-1 1" Dia.

Maxi-Grit Nylon (Individually Packed)

Recommended for removing soft and light scale deposits in straight, ferrous and non-ferrous tubes. The abrasive impregnated nylon bristles of this brush clean and polish tubes in one step.  Unlike regular spiral brushes, Maxi-Grit is designed to be oversized in the tube so the bristles lay over, putting the abrasive in contact with the tube wall.

Part No. Description
1539-1/2 1/2" Diameter for tubes 1/4"-3/8" I.D.
1539-3/4 3/4" Diameter for tubes 3/8"-5/8" I.D.
1539-1 1" Diameter for tubes 11/16"-3/4" I.D.
1539-1-1/4 1-1/4" Diameter for tubes 13/16"-1" I.D.

Maxi-Spin Clean Tapered Impregnated Nylon
(Individually Packed)

Recommended for removing soft and light scale deposits in straight enhanced condenser tubes. The smaller diameter stands stiff and cleans the grooves.  The longer bristles lay flat to clean the large areas between the grooves.  The small diameter of the brush should match the tube diameter.

Part No. Description
1559-1/2 1/2" Diameter for tubes 1/2" I.D.
1559-5/8 3/4" Diameter for tubes 5/8" I.D.
1559-3/4 1" Diameter for tubes 3/4" I.D.
Insert your Review

Your Name :

Email :

Comment :

Please Introduce Secure Code:

Please contact us by phone at (630) 620-6669 or by email at sales@maxi-vac.com for information about this product

 

LiveZilla Live Help