Ideal for use in Service Stations, Garages, Hotels, Motels, Pools, Playgrounds, Restaurants, Fast Food Stores, Industry, Farms. Anywhere requiring a heavy duty hi-pressure, portable, electric cleaning system!
Pressure Regulating/Unloader Valves
This feature allows the operator to select the desired operating pressure from 0 to 1300 PSI by simply turning a knob on the machine. Unloader valves reduce unnecessary wear on the motor and pump. When the trigger is released and no water is spraying, the valves, “unload” the pressure in the pump to zero. This reduces wear on the system and lengthens pump ad motor life.
Soap/Chemical Application
Includes an Injector to allow controlled measured application of soaps or chemicals. Controlled by a simple push-pull motion on the barrel of the nozzle, pressure is changed from low to high. At low pressure, soap can be applied with the water – allowing the soap or chemical to stay on the surface and do its job. At high pressure, only clear water is being sprayed to rinse and clean. Since the Injector is located on the “High-Pressure” side of the pump, no chemicals pass through the pump – lengthening pump life. The Injector is adjustable so that the ratio of soap to water can be changed from “0” to about 10% soap mix, depending on the viscosity of the soap/chemical.
Adjustable Nozzles
All models are equipped with a “Hi-Lo” Nozzle which offers maximum versatility in that the operator can apply cleaners at low pressure or rinse at high pressure, by a simple push-pull adjustment on the nozzle. Also by rotating the barrel of the nozzle, the spray pattern can be changed from zero degrees (for maximum penetration and power) to any desired fan shaped pattern.
Rugged Construction
All fittings are brass, high impact plastic housing. Made in Italy.
JS700i with siphon feature! This unit will siphon from a container for ease of use in rooftop or remote locations (when garden hose is not available). This unit has many special features that makes it ideal for commercial/industrial applications with maximum flexibility.
Siphon Feature
Allows system to vent trapped air, will siphon from container.
Pressure Regulating/Unloader Valves
This feature allows the operator to select the desired operating pressure from 0 to 700 PSI by simply turning a knob on the machine. Unloader valves reduce unnecessary wear on the motor and pump. When the trigger is released and no water is spraying, the valves, “unload” the pressure in the pump to zero. This reduces wear on the system and lengthens pump ad motor life.
Soap/Chemical Application
Includes an Injector to allow controlled measured application of soaps or chemicals. Controlled by a simple push-pull motion on the barrel of the nozzle, pressure is changed from low to high. At low pressure, soap can be applied with the water – allowing the soap or chemical to stay on the surface and do its job. At high pressure, only clear water is being sprayed to rinse and clean. Since the Injector is located on the “High-Pressure” side of the pump, no chemicals pass through the pump – lengthening pump life. The Injector is adjustable so that the ratio of soap to water can be changed from “0” to about 10% soap mix, depending on the viscosity of the soap/chemical.
Adjustable Nozzles
All models are equipped with a “Hi-Lo” Nozzle which offers maximum versatility in that the operator can apply cleaners at low pressure or rinse at high pressure, by a simple push-pull adjustment on the nozzle. Also by rotating the barrel of the nozzle, the spray pattern can be changed from zero degrees (for maximum penetration and power) to any desired fan shaped pattern.
Rugged Construction
All fittings are brass. All housing components are heavy gauge steel, phosphate treated to reduce rust, powder coated, and baked at 400 Degrees for maximum durability. All parts are field repairable/replaceable. Ideal for cleaning A/C Coils, Floors, Walls, Machinery, Playground Equipment, Vents/Hoods, Etc..
The MaxiJet was specifically designed for residential and commercial ground and rooftop condenser coils, PTAC units, microchannel coils, remote location coils, rooftop AC units, evaporator coils, truck and food, refrigeration coils, refrigeration evaporator, condenser coils
The most powerful and versatile 200 PSI battery powered A/C coil-cleaning system available - No more looking for power and/or water supply. Do more jobs with the right tool and increase your profits. Portable, Powerful Rugged Steel Construction capable of cleaning even double coils, rechargeable battery w/ safety circuit gives all day operation on a full charge.
Depending on the type of coils, The MaxiJet has every accessory available to eliminate wasted motions and increase efficiency while performing HVAC maintenance, such as connecting a water hose, connecting the power, removing the guards, premixing the chemicals, and unclogging the drain!
Specifically designed for use in cleaning draught beer dispensing systems and assisting in preventing the buildup of bacteria, mold, and Beerstone from line surfaces. Also ideal for cleaning soft drink dispensing systems, and other applications requiring the recirculation of liquids at low pressure.
• Hard coat finish on pump components resists corrosion from cleaning chemicals
• Easily transportable due to cordless design & quick disconnect hoses
• Case mounted On/Off switch makes these units very user-friendly
• 6' hoses remain flexible even at lower temperatures
• Durable stainless steel casing
• Maintenance free rotary carbon vein stainless steel pump
• Designed for use with larger systems (over 300ft), longer runs, including stadiums, auditoriums, tracks,etc. Pulsation action adds "scrubbing" motion and aids in cleaning
• Powder coated all steel frame
Ideal for Factories, Garages, Farms, Campgrounds, Pools, Resorts, Hotels, Motels, Restaurants, Fast Food Stores, Industry. All applications that require a heavy duty, portable, electric cleaning system. Portable - comes on a cart.
Pressure Regulating/Unloader Valves
This feature allows the operator to select the desired operating pressure from 0 to 1500 PSI by simply turning a knob on the machine. Unloader valves reduce unnecessary wear on the motor and pump. When the trigger is released and no water is spraying, the valves, “unload” the pressure in the pump to zero. This reduces wear on the system and lengthens pump ad motor life.
Soap/Chemical Application
Includes an Injector to allow controlled measured application of soaps or chemicals. Controlled by a simple push-pull motion on the barrel of the nozzle, pressure is changed from low to high. At low pressure, soap can be applied with the water – allowing the soap or chemical to stay on the surface and do its job. At high pressure, only clear water is being sprayed to rinse and clean. Since the Injector is located on the “High-Pressure” side of the pump, no chemicals pass through the pump – lengthening pump life. The Injector is adjustable so that the ratio of soap to water can be changed from “0” to about 10% soap mix, depending on the viscosity of the soap/chemical.
Adjustable Nozzles
All models are equipped with a “Hi-Lo” Nozzle which offers maximum versatility in that the operator can apply cleaners at low pressure or rinse at high pressure, by a simple push-pull adjustment on the nozzle. Also by rotating the barrel of the nozzle, the spray pattern can be changed from zero degrees (for maximum penetration and power) to any desired fan shaped pattern.
Rugged Construction
All fittings are brass.
Electric Motor: 2.0 HP, 3450 RPM, 115/208 - 230 VAC, 60 Hz (50 Hz Motors Available)
19 Amps
Adjustable pressure up to 1500 PSI
2.1 GPM
25' x 3/8" Hose
Portable - On a steel cart with 10" wheels
Trigger Gun w/ Safety
3 Plunger-Oil Bath Pump
28" Quick Couple Wand
Hi-Lo Adjustable Angle Nozzle
35' Service Cord w/ GFCI Plug
81 lbs (Non-Freight)
Dimensions: 28" x 20" x 25" (Skid)